FAQ

Home / FAQ

How Do I Mount My Post Caps?

For Wood Base Post Caps:

  1. Place a generous amount of Liquid Nail or similar outdoor glue on top of the fence or deck post in the shape of an "S". Make sure it is thick enough to spread out once you place the Miterless Wood Post Cap on top of the post.
  2. Place the Post Cap on top of the post where the glue has been applied. Move the cap around to completely spread the glue. *DO NOT PUSH TOO HARD OR THE GLUE WILL FLATTEN TOO MUCH
  3. Make sure the Post Cap is sitting the way you want on top of the fence post.

Can I screw my Miterless Wood Post Cap directly into the post from the top?

We do not recommend screwing post caps into posts from the top. If you decide to do this, pre-drill a hole to prevent cracking.

Can I screw my Miterless Wood Post Cap in the post from the sides?

If you decide to do this, pre-drill holes in the wood cap to avoid splitting.

For Metal Base Post Caps:

  1. Place the Metal Pyramid or Metal Finial snugly on top of the fence or deck post.
  2. Use a Philips head (electric screw driver) to screw the supplied screws into the TWO mounting holes on each side of the post cap or finial. *Note: An electric screwdriver is not necessary. If you do not have an electric screwdriver, you can screw the screws into the wood post by hand with a little extra force and effort.
  3. Make sure the Post Cap is sitting the way you want on top of the fence post.

For Wood Base Post Caps w/ Metal Pyramid:

  1. Place a generous amount of Liquid Nail or similar outdoor glue around the top perimeter of the Raised Edge of the Wood Post Cap Base. Be generous with the amount of glue so it will contact the inside corner of the Copper or Stainless Lid when placed on top of the Raised Edge of the Wood Post Cap Base.
  2. Place the Copper or Stainless Lid on top of the Raised Edge and MAKE SURE THE GLUE MAKES CONTACT with the Copper or Stainless Lid. Wipe away any excess glue.
  3. Please a generous amount of Liquid Nail on top of the post in the shape of an "S". Make sure it is thick enough to spread out once you place the assembled Post Cap on top of the post.
  4. Place the assembled Post Cap on top of the post where the glue has been applied. Move the cap around to completely spread the glue. *DO NOT PUSH TOO HARD OR THE GLUE WILL FLATTEN TOO MUCH
  5. Make sure the Post Cap is sitting the way you want on top of the post.

Post Cap Finish & Care

Can my Wood Post Caps be left alone or do they need to be protected with "sealer"?

Since our wood caps are made of Mahogany, they can be left alon to weather to a gray color. If you want to preserve a fresher look then choose a coating that gives you the protection you desire. You can also paint or stain our wooden post caps.


Will my Copper Post Caps patina to a green color over time?

Yes, since our product is 100% copper they will patina naturally to a dark or green color.


How do I keep my Stainless Steel Post Caps shiny?

They will stay that way naturally. Occasional cleaning will remove natural dirtiness.


What Does “End Grain” Mean?

When a fence post is cut from a tree, the top side of the post was formed by a cut that ran perpendicular to the tree’s grain, exposing the wood grain to the forces of nature. Consequently, “end grain” refers to the exposed wood on the top side of a fence post.

As opposed to the sides of the fence post which are finished and thus resistant to rain, fog, and other forms of moisture, the end grain on a fence post is incredibly vulnerable to moisture. An unprotected fence post will decay quickly, as water and moisture and water enters the wood from the exposed top.

The only way to protect the post from damage is with a post cap. A well-made post cap will stop moisture from seeping in through the end grain, increasing the integrity and longevity of your fence.


What Is The Difference Between Post Caps With And Without Miter Joints?

Miter joints occur when two pieces of wood come together at a right angle, and are found in most other wooden post caps. Most commercial wooden post caps available on the market right now are made exactly the same way: manufacturers take 5 pieces of wood, and then glue and staple them together to form a wooden post cap that is full of miter joints.

The problem with miter joints is that it still leaves itself open to damage in the future. Over time, post caps with miter joints will separate at the edges, allowing the end grain of a fence post to be exposed once again.

Our post caps are completely miterless, and are made from a single piece of wood. Our miterless wooden post cap is the best defense against damage to your fence, with no chance of splitting, breaking, or cracking.


What Are The Differences Between The Post Cap Styles?